Blasting Tips and Project Notes
Buyer's Guide 6 min read

Commercial Concrete Work in Indianapolis, IN: 2026 Surface Prep, Cleaning & Coating Guide

Scott's Mobile Blasting Team Scott's Mobile Blasting
Commercial concrete parking lot and loading dock area in Indianapolis after surface cleaning

Commercial concrete work in Indianapolis, IN doesn't end when the pour cures. Most commercial properties also need surface preparation, cleaning, or coating prep to keep that concrete performing under daily foot and vehicle traffic. Scott's Mobile Blasting handles that side of commercial concrete work for offices, warehouses, and retail sites across the Indianapolis metro, and a free estimate takes one phone call to schedule.

What Commercial Concrete Work Includes in Indianapolis, IN

Commercial concrete work spans a wide range of scopes: new construction slabs, parking areas, curbs, ADA ramps, and the repair or replacement of damaged flatwork at offices, retail centers, warehouses, and municipal properties. New slabs are specified by thickness and strength, light-retail or office floors typically start lighter than warehouse floors that carry forklifts and racking, with final numbers always set by the project engineer and soil conditions.

ADA-compliant ramps and curb cuts have their own technical rules. For curb ramps built after the ADA took effect, the running slope cannot exceed 8.33 percent (1:12), and the ramp needs a detectable warning surface and a compliant landing at the top, as detailed in the U.S. Access Board's accessibility guidelines.

Once that concrete is in place, it still has to be maintained. That's where surface preparation, cleaning, and coating prep come in, and it's the part of commercial concrete work most property owners underestimate until a coating fails or a floor starts shedding dust.

Commercial Concrete Surface Preparation Before Coatings and Overlays

Coatings and overlays fail more often from bad surface prep than from bad product. The industry standard for measuring that prep is the Concrete Surface Profile (CSP) scale published by the International Concrete Repair Institute, which rates prepared concrete on a 1-to-10 roughness scale so a coating contractor and a surface-prep contractor are speaking the same language before work starts.

I'm Scott, owner of Scott's Mobile Blasting, and our crews have spent years matching that CSP target to the coating going down next, whether it's a thin sealer in an office lobby or a heavy-build epoxy in a warehouse. Get the profile wrong and the coating either won't bond or burns through the budget in rework.

Coating or Overlay ThicknessTarget ICRI CSPTypical Prep Method
4-5 mils (thin sealer)CSP 3Light shotblast
15-50 mils (high-build coating)CSP 4-5Medium shotblast
40 mils to 1/8 in (heavy-build)CSP 5-6Medium-heavy shotblast
1/4 to 1/2 in (topping)CSP 6-7Heavy shotblast
Over 1/2 in (overlay)CSP 8-9Extreme shotblast

Our concrete surface preparation and coating preparation services are built around hitting the right number on that chart, not guessing. For paint jobs specifically, see our pre-painting surface prep service.

Close-up of a shotblasted commercial concrete floor showing an even surface profile before coating
Close-up of a shotblasted commercial concrete floor showing an even surface profile before coating

Commercial Concrete Cleaning, Pressure Washing and Stain Removal

Grease, oil, tire marks, and efflorescence build up fast on commercial lots, loading docks, and garage decks. Routine concrete cleaning and power washing keeps those surfaces from staining permanently and makes future coating or sealing work possible without a separate prep step.

Oil stains in particular get harder to remove the longer they sit, since the oil works its way deeper into the pores. If a property already has set-in stains, our guide to removing oil stains from concrete covers the treatment options and when pressure washing alone won't cut it.

Pressure washing equipment cleaning oil stains off a commercial concrete parking surface
Pressure washing equipment cleaning oil stains off a commercial concrete parking surface

Industrial and Warehouse Concrete Floor Prep

Warehouse and industrial floors take a different kind of abuse: old coatings peeling under forklift traffic, rust staining from racking and machinery, and mastic left behind from a prior flooring tear-out. Our industrial sandblasting, heavy machinery cleaning, and industrial equipment maintenance services strip that contamination down to sound concrete before a new coating or floor system goes in.

Abrasive blasting also falls under OSHA's respirable crystalline silica standard, which sets strict exposure limits and controls for anyone disturbing concrete or silica-containing coatings. We plan containment and dust control on every job around that standard, not as an afterthought.

Graffiti Removal and Surface Restoration for Commercial Properties

Vandalism and weathering both take a toll on exterior commercial concrete, from tagged loading dock walls to spalling and surface wear on older flatwork. Our graffiti removal and surface restoration services address both, matching the blast method to the substrate so the repair doesn't leave its own visible scar.

Restored commercial concrete wall after graffiti removal and surface cleaning
Restored commercial concrete wall after graffiti removal and surface cleaning

Eco-Friendly and Low-Dust Blasting for Occupied Commercial Sites

Most commercial sites can't shut down for a prep project. Our eco-friendly blasting and mobile sandblasting methods use lower-dust media and containment so work can happen around tenants, customers, and staff. For properties coordinating multiple scopes at once, our commercial sandblasting company page covers how we structure larger jobs.

Commercial Concrete Service Area: Indianapolis and Central Indiana

Commercial concrete surface prep, cleaning, and restoration work tied to Indianapolis typically extends across the surrounding metro, since many commercial properties sit outside the city core. We work from a central base and travel to:

See examples of completed commercial work on our projects page, or contact us for a free estimate on your property.

FAQ

What does commercial concrete surface preparation actually involve?

It means mechanically removing laitance, old coatings, and contaminants, then profiling the concrete to a specific CSP rating so a new coating, sealer, or overlay bonds correctly instead of peeling or bubbling later.

Can concrete surface prep and cleaning be done while a business stays open?

Usually, yes. Work can often be scheduled for evenings, weekends, or slower periods, and containment methods limit dust and noise so staff and customers aren't disrupted during business hours.

How is commercial concrete surface prep different from pouring a new slab?

New construction sets the slab's thickness, strength, and reinforcement before it cures. Surface prep works on concrete that's already in place, correcting the surface texture or removing contamination so a coating, repair material, or overlay can bond to it.

What CSP does a typical commercial coating need?

It depends on thickness. Thin sealers usually need a CSP 3, high-build epoxy coatings call for CSP 4-5, and thick overlays or toppings need CSP 6 or higher. The coating manufacturer's spec sheet should confirm the exact target.

Can oil stains and old coatings be removed without replacing the slab?

In most cases, yes. Surface cleaning, pressure washing, and targeted blasting remove stains and failed coatings down to sound concrete without demolition, as long as the underlying slab itself isn't structurally compromised.

Do you serve commercial properties outside Indianapolis?

Yes. We regularly work in Carmel, Fishers, Westfield, Zionsville, and other communities across Central Indiana in addition to Indianapolis proper.

Proudly Based in Indianapolis, IN

Stop by, call, or book online — we're always nearby when you need us.

Hours

  • Monday 8:00 AM - 6:00 PM
  • Tuesday 8:00 AM - 6:00 PM
  • Wednesday 8:00 AM - 6:00 PM
  • Thursday 8:00 AM - 6:00 PM
  • Friday 8:00 AM - 6:00 PM
  • Saturday 8:00 AM - 6:00 PM
  • Sunday 8:00 AM - 6:00 PM

Get a Free Estimate